Operating manualDigiBox1for reception of Free To AirDVB satellite programmesArt.-Nr. 0000/4612Digital satellite receiverTimerDIGIBOX1_englisch.qxd
5 InstallationNow that you have connected your new receiver, and have commenced operating it, youcan, if necessary, optimize its functions for your ne
The menu Basic settings will be displayed.> Use the arrow up/down keys to move the marker within the menu, and to changethe individual settings as
5.3 Audio/Video settingsIn order to optimize the settings of your receiver in relation to the TV set, you can make furt-her adjustments in the menu Au
5.4 LNB-Setting/Adjustment of external unit/satellite selectionOnce you have adjusted the receiver to your personal preferences, you should now, if ne
The following adjustments can be made in this sub-menu:5.4.1 Switch DiSEqC on or offDiSEqC (Digital Satellite Equipment Control) is a digital control
The following settings may be made:LOF low bandLOF (Local oscillator frequency) is the frequency used by an LNB to convert the frequencyreceived into
6 Operation6.1 Switching on and off> Switch on the receiver by pressing the On/Standby key on the remote control unit.> Pressing this key again
6.2.3.1 Selecting programme list:In order to facilitate the finding of programmes, your receiver provides four programme lists.You can thus, if you li
6.4 Selecting a different languageIf a programme is broadcast in several languages, you can use the following procedure toselect a different language:
6.9 Transponder Information> Press the green function key (Transponder Information) in order to display data rela-ting to the selected transponder.
On/StandbyNumeric keysProgramme list on/offBackMenu on/offSound on/offEXTERNALLanguage selectionProgramme -Multifunction keysVolume +Programme +TV/Rad
6.11.2 Programme preview for next few daysIn as far as this is provided by the broadcaster, you can use the arrow right key to dis-play information re
> Press the green function key in order to delete the marked timer.> Press the Back to return to the EPG screen, in order to execute further pro
Proceed as follows with the programming:Source> Use the arrow keys to mark the column Source, then use the OK key to enterthe desired source (TV or
order to store the data in memory.> Press the TV/Radio key to return to normal operation.Important Note!!!Please ensure that the correct current ti
7.1.2 Entering programmes in the programme listTo add a programme to the selected programme list, proceed as follows:> Press the red function key (
> Press the OK key to proceed to the selection mode.The programme selected will be marked on the right hand side with a small cross,and the menu di
> Use the green function key to select the programme list in which you wish to blockone or more programmes (Point 7.1.1).> Press the blue functi
2. Transponder:Select this scanning option in order to search only a particular transponder of a satellite. Thiswill search individually for all progr
> Use the arrow up/down keys to mark the line All, in order to scan all activesatellites for programmes, or select a specific satellite in order to
> Confirm by pressing the red function key (“Start search”).The scan will commence. Please note further information displayed on screen.> Press
Table of contents1 Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Contents . . . . . . . . . . . . . . . . . . . . . . .
> Use the arrow up/down keys to mark the line Settings.> Confirm by pressing OK.The sub.menu >Settings will be displayed.> Now use the arr
7.5.2 Delete all programmesThis function serves to completely delete all programme memory.> Use the arrow up/down keys to mark the menu line Delete
Frequency range: a) Satellite resp. LNB:11 GHz range from 10,70 GHz to 11,70 GHz, 12 GHz range from 11,70 GHz to 12,75 GHzb) Receiver: Intermediate fr
Satellite receiver: The signals received and converted by the LNB cannot be processed by the TV set. Thesatellite receiver modulates and processes the
Active image area 720 Pixel x 576 linesImage formatt 4 : 3 / 16 : 9 Image material 16:9 Automatic adjustment for 16:9 TV sets (via SCART) Letterbox
LNB Power supply:LNB current 400 mA max.; double insulatedLNB voltage vertical <14,0V no load, > 11,5 V at 400 mA LNB voltage horizontal < 20
10 Troubleshooting Guide36ProblemNo picture, no sound, LED notlightedNo picture, no sound, LED onTemporary square blocks in pictu-re, temporary freeze
Dear customer,we would like to repeat that, in case you experience the following problems, you should atfirst try to remedy the technical problem your
Brief instructions for daily useSwitching on and off> Switch the receiver on by pressing the On/Standby key on the remote control unit.> Press t
7 Change basic programming . . . . . . . . . . . . . . . . .237.1 Configure programme lists . . . . . . . . . . . . . . . . . . . . . . . . . .237.1.
Mains connectionSCART connector VCRAudio outputleft/rightRS 232interfaceLNB inputSCART connector TVDIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 2
63 Please read this firstNOTE:English speaking customers - the default setting of your receiver isGerman. You should go directly to chapter 5 to chang
7> The receiver may only be operated in a temperate climate.> Never open the cover of the unit! You may be subject to an electrical shock. Anyne
8888bed_anl_DigiCom1A_neutral.qxd 29.06.00 11:54 Seite 8Connecting the DVB receiverto a satellite installationa. Connection from LNB to LNB IN conn
4 ConnectionsThe various references below - a b c etc., refer to the diagram on page 8.4.1 Mains connectionThe receiver should be connected to the mai
Comments to this Manuals