TechniSat AX1 User Manual download pdf (Page 6)

3 Connections

3.1 Outdoor unit

If possible, try to use an outdoor unit with TWIN LNB to be able to

receive satellite TV channels and digital radio channels at the

same time, independent of each other. If you do not want to

receive TV and digital radio channels at the same time, you may

continue to use your V/H LNB (s.3.3 Satellite TV receivers).

Connect the LNB input of the ASTRASTAR AX 1 with the LNB of your

receiving equipment using an adequate coax cable. If the LNB

input is overloaded the message “cable error” appears in the

display after switching on.

If there is a short-circuit on the LNB input,the ADR receiver switches

off (a “ticking” is heard). In both cases switch off the ASTRASTAR AX

1 using the mains switch and eliminate the error cause. Observe

also 4 “Installation”.

3.2 HiFi amplifier

Connect the audio analogue outputs of the ADR receiver

ASTRASTAR AX 1 with an adequate amplifier input of your HiFi

equipment (e.g. CD or AUX). Caution, the phono input is not

adequate!

Devices with digital inputs (amplifiers, DAT recorders etc.) you can

connect to the electrical digital output.

Corresponding connection cables you can buy from your

TechniSat sales representative.

3.3 Satellite television receiver

If you want to operate your ADR receiver and a satellite television

receiver with a V/H LNB connect the coax cable from the LNB input

of the satellite television receiver to the TV receiver connection of

the ADR receiver.

ADR ST3004 S

HiFi

Outdoor unit:

TWIN-LNB

ADR

2-way distributor

external voltage supply

ST3004 S

HiFi

Outdoor unit:

ISISAT A/B or

ISISAT A/B/C for

a single cable solution

You can also connect the ASTRASTAR AX 1 to an ISISAT serial

distribution. Please take into consideration that in this case not all

channels can be received.

ST3004 S

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

TechniSat AX1 User Manual Page 6

Comments to this Manuals