TechniSat DIGIT MF4-S User Manual Page 19
- Page / 74
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
6.4.1 Switching DiSEqC on or off
DiSEqC (Digital Satellite Equipment Control) is a digital switching
signal used to control DiSEqC-compatible components via the anten-
na cable. If your external installation is equipped with DiSEqC com-
ponents, you must switch on the DiSEqC control:
> In this line, use the OK key to switch DiSEqC on or off.
As only one LNC can be addressed if the DiSEqC control is
switched off, the menu is restricted to the configuration of a
single LNC.
6.4.2 Setting the switching matrix
Four switching criteria for the DiSEqC control are indicated in the
menu. You receiver is pre-programmed, so that ASTRA will be recei-
ved at switching position A/A and Eutelsat at switching position B/A
of a multi-switch. Should your receiving installation be configured dif-
ferently, or should you receive other satellites, you can adjust the set-
tings of your digital receiver to your antenna as follows.
> Use the arrow keys to select the DiSEqC switch position
(1-4) you wish to allocate to a particular satellite (e.g.. A/B 3
No Satellite), and mark this line.
> Confirm by pressing OK.
A table will be displayed, allowing you to select from various
satellites.
> Use the arrow keys up/down to mark the selected satelli-
te. The arrow keys up/down will move the marker up or
down the list one line at a time, use the arrow keys
left/right to move back or forward one page at a time.
If the satellite you are looking for is not included in the list,
please select a reserve position, designated User 1 to
User 14.
> Confirm by pressing OK. The selected satellite will now be
added to the menu Antenna Settings at the previously
marked position.
Now proceed to enter the data in the menu Antenna Settings,
until the data in this menu corresponds with that of your antenna
installation. For any switching criteria not required select the setting
No Satellite.
19
(Fig. 6-8)
A B
Position
Output
A B
Position
Output
A B
Option
Output
Example:
- DIGIT MF4-S 1
- 1 Contents 2
- 2 Illustrations 5
- Remote control 5
- Please read this first 8
- Disposal advice 9
- Safety advice 9
- When not in operation 9
- Connecting the DVB receiver 10
- 4 Connections 11
- 5 Initial installation 12
- (Fig. 5-5) 13
- (Fig. 5-6) 13
- (Fig. 5-3) 13
- (Fig. 5-4) 13
- (Fig. 5-7) 13
- (Fig. 5-8) 14
- (Fig. 5-9) 14
- (Fig. 5-10) 14
- (Fig. 5-11) 14
- (Fig. 5-12) 14
- 6 Settings 15
- 6.2.2 Country 16
- 6.2.3 Remote control code 16
- 6.2.4 Standby clock 16
- 6.3 Audio/Video settings 17
- 6.3.1 Picture format 17
- 6.3.2 Language (Audio signal) 17
- 6.3.3 Language (Sub-titles) 17
- 6.3.4 TV SCART mode 17
- 6.3.5 VCR SCART mode 18
- 6.3.6 Dolby Digital (AC3) 18
- 6.4 Antenna settings 18
- (Fig. 6-8) 19
- (Fig. 6-9) 20
- 7 Operation 21
- 7.2 Selecting a programme 22
- 7.2.2 Using the numeric keys 22
- 7.2.3.1 Selecting a list 22
- 7.2.5 Information box 23
- 7.3.1 Special functions 24
- 7.3.1.1 Multi-feed options 24
- 7.3.2 CONAX PIN Code 25
- 7.4 Volume control 25
- 7.5 TV/Radio switching 25
- (Fig. 7-11) 26
- (Fig. 7-10) 26
- 7.10 Transponder information 27
- 7.11 Freeze frame 27
- 7.12 Sleep timer 28
- 7.13 Video text 28
- 7.15.1 Downloading SFI data 30
- 7.15.5 Next 31
- 7.15.6 More 31
- 7.15.7 SFI functions 32
- 7.15.7.1 SFI Information 32
- (Fig. 7-19) 33
- 7.15.8 Terminating SFI 34
- 7.16 Timer recordings 35
- 7.16.2 Timer overview 37
- Please note!!! 38
- (Fig. 8-1) 39
- (Fig. 8-2) 39
- (Fig. 8-3) 39
- 8.1.3 Deleting programmes 40
- 8.1.4 Sorting programmes 41
- (Fig. 8-7) 42
- 8.2.1 Selecting a channel 43
- 8.2.2 Start category 44
- 8.2.3 Updating time 44
- 8.2.4 Updating 44
- 8.2.5 SFI channel 44
- 8.3 Parental control 45
- 8.3.1 Changing the unit PIN 45
- 8.3.2 Mode 46
- 8.3.3 Selecting channels 46
- 8.4 Programme scan (search) 46
- 8.4.1 Automatic scan 47
- 8.4.2 Satellite scan 47
- 8.4.3 Transponderscan 48
- 8.4.4 Manual scan 49
- 8.4.5 After the scan 49
- 8.5 Service settings 50
- 8.5.2 Delete all programmes 51
- 8.5.3.1 Adapting programmes 52
- 8.5.3.2 Deleting programmes 53
- 8.5.4 Update software 53
- 8.5.5 Copying the settings 54
- 8.6 System configuration 55
- (Fig. 9-6) 56
- (Fig. 9-7) 56
- (Fig. 9-4) 56
- (Fig. 9-5) 56
- 9.2 Geo-positioning 57
- (Fig. 9-10) 58
- (User satellite) 59
- (Fig. 9-12) 60
- (Fig. 9-13) 60
- 9.4 Current satellite list 61
- 10 Technical terms 62
- 11 Technical data 65
- 12 Trouble-shooting guide 67
- 13 Annexure 69
- 14 Index 71
- For daily use 74
Related products and manuals for TV set-top boxes TechniSat DIGIT MF4-S
(176 pages)
TV set-top boxes TechniSat S1 User Manual
(102 pages)
(102 pages)
© 2020, manymanuals.com. All rights reserved. | 2.004 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals