TechniSat DigiCorder S1 User Manual download pdf (Page 15)

Position B/Option B

> Use the arrow up/down keys to mark the satellite

you wish to receive at the DiSEqC setting Position

B/Option B, and confirm by pressing OK. (Fig. 5-10)

As your next step, check again on the configuration of your

antenna.

> If you wish to accept this setting, use the arrow

up/down keys to mark the field Yes, and confirm by

pressing OK. (Fig. 5-11)

Updating software

When you have confirmed the antenna settings, the digital

receiver will automatically check whether a more up-to-date

version of the software for your unit is available via satellite. If

a new version of the software is available, you can perform

an automatic software update.

> Use the right/left arrow keys to select the field

Update, and confirm by pressing OK. (Fig. 5-12) The

new software for your unit will now be downloaded.

This procedure may take several minutes.

Scanning for programmes

Once you have checked on the software version, and possi-

bly downloaded an updated version, you can proceed to

searching for programmes.

> Use the up/down arrow keys to mark the field All

Channels, if you wish to scan for both encrypted and

free-to-air programmes, or select All Free-to-air

Channels if you wish to scan for only this type of pro-

gramme. (Fig. 5-13)

> Confirm your selection by pressing OK, the unit will

perform an automatic programme search. All the satel-

lites selected during the antenna configuration prove-

dure will be scanned for programmes. This procedure

may take several minutes. Please note any messages

displayed on screen.

(Fig. 5-8)

(Fig. 5-9)

(Fig. 5-10)

(Fig. 5-11)

(Fig. 5-12)

Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 77 78

No comments

TechniSat DigiCorder S1 User Manual Page 15