TechniSat DigiCorder S1 User Manual Page 62
- Page / 78
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
focus procedure.
While the automatic adjustment is in progress, the
message Autofocus will be displayed. (Fig. 9-13)
9.3.3 Saving a satellite position
NWhen the Autofocus function has been completed, you can
proceed to save the satellite position in memory.
> Use the arrow keys to mark the field Save.
> Press OK.
Now the test transponder selected will check whether
a signal is being received at this position. At the same
time, the system will check whether the position to be
saved is one that is already included in the pre-pro-
gramming. (Fig. 9-14)
If this is the case, the message will be displayed:
Orbital position xx found. Save satellite ?
(Fig. 9-15)
>To save the satellite position in memory, use the
left/right arrow keys to mark the field Yes, and
confirm by pressing OK.
If the check carried out by the test transponder does
not recognise a position as being included in the pre-
programming, or if the signal is too weak, an appropri-
ate message will be displayed on screen.
(Figs. 9-16 and 9-17)
>To save the satellite position in memory, use the
left/right arrow keys to mark the field Yes, and
confirm by pressing OK.
9.4 Current satellite list
The satellite positions that have been saved in memory can
be found in the satellite list. Positions that have not yet been
saved are indicated in the list by an “*”.
>To turn the antenna dish to a position in the satellite
list, use the arrow keys to mark the field Current
satellite list.
> Confirm by pressing OK.
> Use the up/down arrow keys to select the desired
position.
> Confirm by pressing OK.
The dish will now be turned to the selected position.
While the positioning procedure is in progress, the
blinking message “turn” will be displayed in the menu.
9.4.1 Selecting a satellite position
In order to turn the dish antenna to the position specified in
the satellite list, your digital receiveris equipped with the fun-
ction turn to Sat.
62
(Fig. 9-16)
(Fig. 9-17)
(Fig. 9-14)
(Fig. 9-15)
(Fig. 9-13)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 62
- DigiCorder S1 1
- 1 Contents 2
- 2 Illustrations 5
- 3 Please read this first 8
- Disposal information 9
- Safety notes 9
- Temporary disconnection 9
- 4 Connections 11
- 4.3.2 Via HF cable 12
- 4.5 HiFi Amplifier 12
- 4.5.1 Analogue 12
- 4.5.2 Digital 13
- 4.7 Serial Interface (RS 232) 13
- 5 Initial installation 13
- (Fig. 5-6) 14
- (Fig. 5-7) 14
- (Fig. 5-3) 14
- (Fig. 5-4) 14
- (Fig. 5-5) 14
- (Fig. 5-8) 15
- (Fig. 5-9) 15
- (Fig. 5-10) 15
- (Fig. 5-11) 15
- (Fig. 5-12) 15
- 6 Settings 16
- 6.2 Basic settings 17
- 6.2.2 Country 17
- 6.2.3 Remote control code 17
- 6.2.4 Standby clock 17
- 6.3 Audio/Video settings 18
- 6.3.1 Picture format TV set 18
- 6.3.2 Language (Audio signal) 18
- 6.3.3 Language (Sub-titles) 18
- 6.3.4 TV SCART mode 18
- 6.3.5 Video system 19
- 6.3.6 Dolby Digital (AC3) 19
- 6.3.7 UHF output channel 19
- 6.4 Antenna settings 20
- Example: 21
- 7 Operation 22
- 7.2 Programme selection 23
- 7.2.2 Using the numeric keys 23
- 7.2.3.1 Selecting a list 23
- 7.2.5 Information box 24
- Special functions 25
- 7.3.1 Multifeed options 25
- 7.4 Volume control 26
- 7.6 TV/Radio switching 27
- VT group VT block 28
- 7.13 Sub-titles 29
- (SiehFern Info) 29
- 7.14.1 Downloading SFI data 30
- 7.14.5 Next 31
- 7.14.6 More 31
- 7.14.7 SFI functions 32
- 7.14.7.1 SFI Info 32
- (Fig. 7-19) 33
- (Fig. 7-20) 33
- 7.14.8 Exiting from SFI 34
- 7.15 Hard drive operation 34
- 7.15.1 Recording 34
- 7.15.1.1 Instant recording 35
- 7.15.1.2 Timer recordings 36
- Manual timer programming 37
- Timer overview 38
- Changing timer programming 38
- Deleting timer programming 39
- Programming a new timer event 39
- Timeshift function 39
- 7.15.2 Play 40
- 7.15.2.2 Pause/Freeze frame 41
- 7.15.2.4 Ending Play 41
- 7.15.3.1 Managing recordings 42
- 8 Changing basic programming 43
- (Fig. 8-3) 44
- (Fig. 8-1) 44
- (Fig. 8-2) 44
- 8.1.3 Deleting programmes 45
- 8.1.4 Sorting programmes 46
- 8.2.1 Selecting a programme 47
- 8.2.2 Start category 48
- 8.2.3 SFI channel 48
- 8.3 Parental control 49
- 8.3.1 Changing the unit PIN 49
- 8.3.2 Mode 50
- 8.3.3 Selecting a programme 50
- 8.4 Programme scan 51
- 8.4.1 Automatic scan 51
- 8.4.2 Satellite scan 52
- 8.4.3 Transponder scan 52
- 8.4.4 Manual scan 53
- 8.4.5 After the scan 53
- 8.5 Service settings 54
- 8.5.2 Delete all programmes 55
- 8.5.3 Updating software 55
- 8.5.4 Copying the settings 56
- 8.6 System configuration 56
- 8.7 Encryption system 56
- (DiSEqC 1.2) 57
- 9.1.2 Set Eastern limit 58
- 9.1.3 Setting Western limit 58
- 9.2 Geo positioning 58
- (User satellite) 60
- (Fig. 9-12) 61
- 9.4 Current satellite list 62
- 10 Technical Terms 63
- 11 Technical data 66
- 12 Troubleshooting guide 69
- 13 Annexu 71
- For everyday operation 76
- 342_03 2233440000800 77
Related products and manuals for TV set-top boxes TechniSat DigiCorder S1
(176 pages)
TV set-top boxes TechniSat S1 User Manual
(102 pages)
(102 pages)
© 2020, manymanuals.com. All rights reserved. | 1.160 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals