Technisat TechniStar K2 ISIO User Manual download pdf (Page 26)

2 Channel name with the corresponding channel slot within the active favourites list.

3 Progress bars or the start/stop time of the programme being shown.

4 The current date and the time.

5 Shows that

there is further information available about the broadcast.

6 Programmes on the channel being shown.

> You can access the various SFIplus views and functions using the Options

selection as well as via the assigned function key located at the lower edge of

the screen.

> You can switch the display time back and forth or move the marking with the aid of

the right/left arrow keys, the up/down arrow keys and the page up/down

button.

> You can exit the electronic programme guide again by pressing the EPG/SFI button.

8.14 Timer recordings

Your device has the following timer functions:

1. DVR timer

This function is used to switch your digital receiver on and off to record the recording

medium selected in the Recording Media Settings menu while you are out.

2. Video recorder timer

If the video recorder timer is selected, your digital receiver will be switched on and off for the

selected programme, allowing you to record programmes to an external recording unit, e.g.

a video cassette or DVD recorder, while you are out.

3. Channel switching timer

If your receiver is in normal operating mode, it will switch to the programmed channel slot at

the set time.

4. Alarm

If your receiver is in standby mode, it is switched on when the programmed channel slot is

reached at the set time.

5. Series timer

To make it easier to find programmes, you can search for programme data highlighted in

the EPG/SFI using any terms. The series timer function is used to automatically generate

ongoing DVR timer settings for the programmes you find. Timer setting also continues

after the EPG/SFI data has been updated. This removes the need for repeated manual

programming of timers, e.g. to record episodes in a TV series.

8.15 Selecting a function

> You can open the Navigation menu (NAV menu) to select the function you want by

pressing the Navigator/function selection button.

> Use the up/down arrow buttons to highlight the function you want to access.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

No comments

Technisat TechniStar K2 ISIO User Manual Page 26